Cherries! Also Blow Off Tube Technique

I was walking through Safeway a few days ago when I saw that cherries had come in - they were $4 a pound, which makes the desired recipe over $25 just for the cherries (with tax). I think I'll wait until they're back to $1 a pound, but it's encouraging to see them back in stores. I'll have to pick up the rest of the stout grain bill when I get a chance.

Also, I purchased a clone brew kit from Austin Homebrew Supply - I modified the base Tripel Karmelite clone recipe to have 'mini-mash' (which adds a very surprising amount of grains - not something a standard grain bag can hold - it will require steeping loose grains and 'sparging' them into a backup container due to the 5+ lbs of grains that came). It also came with a huge bucket of 7lbs of LME, which was astounding until I remembered the stout kit I made with a large amount of grains as well - the LME came in two different tubs at that point, which is why it looked smaller to me.

I went with the recommended White Labs (or at least the first on the list) yeast, but left out the yeast fuel. The OG on this is up over 1.08 and if you added fuel to this, you'd have such active fermentation that you'd definitely need a blow off tube in addition to a lot of rags.

It looks like the blow off technique is to  insert a tube into the carboy that is well above the wort (but not right up at the lid). Make sure the seal going out of the carboy is tight. From there, put the other end of the hose into a container that has a good amount of water in it so that the gas released from the fermenting wort will be pushed through the hose an into the water, but not allowing 'air' back into the carboy. It's just a really big airlock.

As the yeast was liquid, I did add the 'cold pack' and I hope (for my brother's sake) that I remembered to include the priming sugar. If not, sorry bro, you can use regular table sugar, just decrease the amount a bit (you'll have to google it, I don't remember the proportion off the top of my head). Table sugar is more potent and I'm not sure it is the best flavor, but I've been told that I just over-carb'd the one recipe I did with it.

I also hope I added the 1% ABV boost - just a cup or so of maltodextrine - just because it's kinda fun to have a really strong beer. However, this means that maturation time will be longer (by several weeks), and fermentation will be more active (violent, if you use a standard airlock - it will pop!), and then I hope I also included bottling caps. If not, priming sugar and caps can be picked up quickly and easily at a local homebrew supply and I'm sorry.

Hopefully I'll get a review of the kit (nobody had posted one online, which was sad because you don't really know what you're getting), but also - hint, hint - a bottle or two to taste myself.